White Brand New

Smoke Heat Alarms Wireless Interconnected Interlinked Battery Powered Kits

Smoke Heat Alarms Wireless Interconnected Interlinked Battery Powered Kits

Smoke Heat Alarms Wireless Interconnected Interlinked Battery Powered Kits    Smoke Heat Alarms Wireless Interconnected Interlinked Battery Powered Kits

Smoke Heat Alarms Wireless Interconnected Interlinked Battery Powered Kits. The Interconnected Smoke Alarms and Heat Alarms can interconnect with each other and ANKA wireless inter-linked smoke alarm syetem item, One goes all go interconnected Heat Detector so that they all sound when one is activated, warning you of fire throughout your home and increasing safety, keeping you and your family safe. Certified Quality: This wireless interlinked smoke alarm is made of ABS, which is very durable and resists high temperatures, doesn't contain any radioactive material, in full compliance with CE EN14604 and AS3786, and Rohs standards to ensure its safety and reliability.

The wireless battery-operated interlinked smoke alarms can interconnect with each other, One goes all go wireless interconnected smoke alarms so that they all sound when one is activated, warning you of fire throughout your home and increasing safety, keeping you and your family safe. Help keep your family safe with this battery powered smoke alarm featuring a Photoelectric sensor for smoke detection; a loud alarm sounds when smoke levels are elevated. Battery operated alarm unit provides continuous monitoring even if there's a power failure; Plus, it's easy to install. To ensure complete protection make sure to place one on each level of your home and in each bedroom.

Comform to EN 14604:2005. With built-in 10 year battery. Wireless interconnect with up to 20 alarms. Highly audible warning alarm -85dB at 3m. Hush button or wireless remote for test/hush.

Sensor chamber protected by specially designed insect screen. This user's manual contains important information about your Heat Alarm's operation. If you are installing this heat alarm for use by others, you must leave this manual or a copy of it with the end user.

Interconnected heat detector was designed with precise Microprocessor control. It's perfectly suitable and very easy to install on the ceiling, suitable for horizontal, living room, stair crawl space, storage room, and also suitable for kitchen, boiler room, power generation room, drying workshop, smoking room, where the relative humidity is often greater than 95%, Dust workshops and other spaces where smoke detectors are not suitable for installation. Using a sensitive temperature sensor, when the ambient temperature exceeds 136.4°F (58°C), it can quickly emit a sound greater than 85dB and a warning light alarm. The highly stable wireless interconnection function can trigger the detectors in other rooms in a large range. Sound and light alarms are issued to warn you more comprehensively of danger.

The product has a highly stable chip and algorithm, which can reduce false positives and false negatives, and protect your life and property at any time. Battery case at the back of a sensor for easy removal of a battery. Power supply: 3V Lithium Battery.

Alarm Indicator: Red LED Flashing. Alarm Sound Level: Exceeding 85dB at 3m. Protected area: 30 square meters.

Normal work: the green light flashes once every 60 seconds. Fault: The red light flashes twice every 60 seconds and accompanied by a buzzer. Low voltage: the red light flashes once every 60 seconds with a buzzer.

Alarm: The red light flashes once every 0.1 seconds, accompanied by a buzzer, and continues until the temperature drops, and the alarm ends. Mute: Short press the button when alarming, turn off the alarm sound when alarming, the duration of silence is 9min. Test: When the detector is under normal status, Press the button shortly.

After the test is completed, it will simulate a 9s sound and light alarm, which can trigger the equipment in the same network group to enter the test, and wait for 18s before testing again. The temperature detector is suitable for relative humidity often greater than 95%, no smoke or fire, a large amount of dust, under normal conditions, there is smoke and dust staying, kitchen, boiler room, generator room, drying workshop, smoking room, and other installations are not suitable for installation Halls and public places with smoke detectors. When the detector is used to protect cables, stacks and other similar protection objects, it should be arranged in contact; when it is installed on various belt conveyors, it should be installed near the hot spot of the device.

It is not suitable to install in a place where the temperature is below 0? The communication distance is about 20 meters for indoors. In the complex structure of the house, the two points are separated by walls, and the distance is relatively far apart, try to set up a network group independently to avoid long-distance interconnection, which may cause abnormal communication. To clear out the devices in the group, press and hold the button, the green light flashes after 3 seconds, and then a short beep after four flashes, then release the button; if the clearing is successful, the device beeps once and the green light flashes three times slowly. Please test the product once a week to ensure that the product is operating normally. Clean around the temperature probe once a year to ensure that there are no coverings. The Interconnected Heat Detector can interconnect with each other and ANKA wireless inter-linked smoke alarm syetem item, One goes all go interconnected Heat Detector so that they all sound when one is activated, warning you of fire throughout your home and increasing safety, keeping you and your family safe. Step one: For any device in the group, long press the button, the green light flashes after 3 seconds, and then a long beep after three flashes. At this time, release the button and the red light flashes quickly, waiting for other devices to be assigned to the current group. Step two: Select a new device that needs to join the group, long press the button, the green light flashes after 3 seconds, and then a short beep after two flashes. At this time, release the button, the red light slowly flashes, and wait to join the group; if the join is successful, the red light flashes three times, with a Long Beep. Note: The devices that have been added to the group will turn on a long red light after step 2 and then flash three times quickly. You need to join a new net group and clear and remove out from the old group.

We will reply to you quickly and try our best to serve you. We are not responsible for undeliverable addresses. Sometimes, it will delay as the custom of clearance. We offer an extended 14 day cancellation period on all goods.

You can change your mind for any reason within 14 calendar days of receiving your item. It means a repair service or a replacement is offered for any faulty goods during the 1month period. Beginning on the day on which the 14 day cancellation period ends. We will try our best to resolve your problems and inquires. Thanks for your understanding and cooperation.

This item is in the category "Home, Furniture & DIY\Home Security\Smoke & Gas Detectors". The seller is "b2buy2019" and is located in this country: CN. This item can be shipped to all countries in Europe, Japan, Canada.

  • Style: 5 AJ-762S14+1Heat Alarm
  • Battery Included: Yes
  • Brand: ANKA
  • Bundle Description: Photoelectric Smoke Alarm Worlds with 10 YEAR Battery
  • Colour: White
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Features: Photoelectric Smoke Sensor
  • Item Depth: 42mm
  • Item Diameter: 110mm
  • Item Weight: 140g
  • Manufacturer Warranty: 2 years
  • Model: AJ-762
  • Operating Sound Rating: 85dB
  • Power: 3V Lithin
  • Power Source: Battery
  • Type: Smoke Alarm
  • Year Manufactured: 2021


Smoke Heat Alarms Wireless Interconnected Interlinked Battery Powered Kits    Smoke Heat Alarms Wireless Interconnected Interlinked Battery Powered Kits